|
|
|
|
|
 |
At Bison, we build all of our products using one simple philosophy: it’s
what’s inside that counts. We have been defining gearmotor Robusticity
for over 40 years.
“There’s a simple philosophy behind the design of every
Bison product: start with the highest quality components and then, through
better design and manufacturing techniques, maximize the throughput those
components can produce. Higher quality components means more dependable
performance, fewer field failures, up to 200% more torque than typical
- leading to a lower cost per inchpound of torque, a more compact product,
and longer service life.”
- Ron Bullock
Chairman & CEO
Of course, it doesn’t hurt to offer the industry’s best
service and support either.With rapid response at every stage of the
engineering process, we keep you on top of your schedule. Our experienced
team of field representatives offer on-the-spot consultation and trouble
shooting. Bison offers the very best in applications engineering assistance,
so you never have to over-specify to get what you need.
|
| |
| |
- Housing – Single Piece aluminum housing – Lighter
and dimensionally stronger than zinc, our gearcase is machined
on automated mills for superior alignment of bearings and gearing.
- Finned End Bell –Bison’s finned rear end bell
not only reduces weight, but more importantly improves the thermal
resistance of the frame.
- Replaceable brushes on DC products – Long wearing brushes
with multiple sizes tailored to the application.
- Precision Gearing – Fully automated gear hobbing combined
with carbide cutting tools ensures the balance you are looking
for: smooth, quiet, and chatter-free gearing.
- Oil bath lubricated – Simply the best choice for gear
lubrication, we specify synthetic oil to maximize load capacity
and gear life.
- Epoxy Powder Coat finish – Our paint is oven cured,
corrosion resistant, and is the most durable in the industry.
- Oversized ball bearings – Our output shaft is supported
with the largest bearings in the industry, allowing maximum life on
high radial load applications. Easily manages high shock loads
and shaft mis-alignment problems, with lower audible noise.
- Optimized motors – All of our standard motors have been
designed for today’s aggressive use. Balanced armatures,
premium ball bearings, and high integrity insulation systems insure
long life.
- Mounting Options – Bison offers many different mounting
options to fit your application. Choose from pilot, foot, or
flange mounts to optimize your application!
|
|
|
 |
