|
|
|
|
|
| QUICK SPECS |
|
Input Voltage VAC |
115 or 230 Single Phase |
HP Rating 230V |
1/6 to 1 |
|
Output Current AMPS |
4.0 |
Output Frequency |
0-120 Hz |
|
Configuration |
NEMA 4X |
|
SPECIFICATIONS
| Specifications |
| |
• NEMA 4X Enclosure: Compact, easy to mount, black plastic enclosure.
|
| |
• Isolated Inputs: Accepting floating or grounded signals 0-10VDC, 0-5VDC or 4-20 mA.
|
| |
• User Adjustable Calbration pots: Minimum speed, maximum speed, current limit, acceleration, deceleration, slip compensation, boost, sero set, brake current, and brake time.
|
| |
• Diagnostic LED's: Power, fault, and torque limit.
|
| |
• Stopping Modes: DC injection braking or coast. (jumper schedule)
|
| |
• Switching Frequency: Adjustable 4 to 16 kHz switching frequency; Quiet motor operation or reduced electrical noise.
|
| |
• Quick Disconnect Terminal Block: Allows up to 200% torque to overcome intermittent peak loads.
|
| |
• Additional Features: Auto or manual restart after low input voltage fault ( jumper selectable), line fusing, enable and direction inputs.
|
|
